Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

symbol table

Created by: saeed at: 2/26/2009 2:33 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/26/2009 2:33 PM	Rate (0)
saeed Posts: 115 Rating: (1)	Dear Friends, I have a problem for sending message to OS, I use Step V5.4 and WINCC v6.2 and I want to send some message from my symbol table and also I use CPU oriented message configuration and I set all the necessary steps in special object property of symbol ,but I don’t have the message in alarm logging of wincc after compilation ,what should I take care to have the message in WINCC ? Thanks in Advance, Saeed
saeed Posts: 115 Rating: (1)
Suggestion To thank Quote Answer

2/26/2009 3:09 PM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 4/19/2023 Posts: 932 Rating: (117)	Find the attchment for Alarm messages and Block related messages from Step7 to WinCC. Attachment Alarm & Block Related messages.zip (44 Downloads)
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on