Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Synchronization between 2 IP 264

Created by: ghigoweb at: 1/18/2016 12:37 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/18/2016 12:37 PM	Rate (0)
ghigoweb Member Joined: 8/6/2007 Last visit: 12/3/2020 Posts: 1 Rating: (0)	Can I sychronize two IP 264 count, if their parameterization is a simulated encoder? Tanks

Suggestion To thank Quote Answer

1/29/2016 4:51 AM	Rate (0)
Navnag Platinum Expert Joined: 11/21/2007 Last visit: 5/27/2023 Posts: 2321 Rating: (303)	Hello You can download the Manual for IP-264 from the following link : https://support.industry.siemens.com/cs/in/en/view/15347252 Although I have never used it, The Page-73 of the manual indicates that you can use the "SET SYNC Bit via Software" in this mode too. You can try this and post the results here Hope this helps Cheers Navnag
	Last edited by: Navnag at: 1/29/2016 4:51:46 AM There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on