Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

synchronization error in Software redundancy

Created by: Buzz LightYear at: 8/25/2010 1:59 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

8/25/2010 1:59 PM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 9/5/2024 Posts: 83 Rating: (3)	Hello: I configure the Software Redundancy with CPU317-2+DP Slave*2,I have a question of the synchronization,testing steps list below 1)Configure the SW finished and the synchronization all ok 2)Power Off the slave station 4,and the synchronization is interrupt 3)Power on the slave station 4,and the synchronization is still interrupt 4)Restart the A Station(standby),and the synchronization is ok again is the testing result correct?I thought the synchronization should be ok again automatically. Best regards Buzz LightYear Attachment proj_data.zip (95 Downloads)

Suggestion To thank Quote Answer

8/26/2010 2:22 PM	Rate (1)
Titas Posts: 94 Rating: (15)	Hello, Whaich software library you are useing. For that CPU have to use the latest library (Software Redundancy_lib_V1.2_SP3). Attached here. Regards:- TITAS
Titas Posts: 94 Rating: (15)	Last edited by: CS Moderator at: 8/30/2010 2:31 PM name of the library added; attachment deleted
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Buzz LightYear

8/27/2010 10:00 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 9/5/2024 Posts: 83 Rating: (3)	Dear Titas: Thanks for your help,I update the library in my project,the slave and sync problem is solved,but a new problem happened, [snip]... Best regards Buzz LightYear
	Last edited by: CS Moderator at: 8/30/2010 5:15 PM new question split to a new thread
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on