Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

System 3 zero speed control & parameter download problem

Created by: Nanu_333 at: 4/24/2012 2:59 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

4/24/2012 2:59 PM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 8/22/2023 Posts: 196 Rating: (5)	Dear Expert, AS I am recomissioning system 3G (grinding machine by naxos),I have enter %TE backup & seting data & make all system healthy but When I am trying to move the Axis in JOG it is giving alarm 101 i.e zero speed monitor.So plz let me know what is the exact problem. Also When I am tryig to edit R parameter it is giving alarm parameter inhibited means I canot edit the parameter(R par only)((I have kept toggle switch up position on 3840 board)),, also I can take upload through winpcin but No download is possible, plz let me know why download is not possible. Thanks Chetan

Suggestion To thank Quote Answer

4/24/2012 4:13 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 12/8/2023 Posts: 1502 Rating: (176)	Hi rageshwari AS I am recomissioning system 3G (grinding machine by naxos),I have enter %TE backup & seting data & make all system healthy but When I am trying to move the Axis in JOG it is giving alarm 101 i.e zero speed monitor.So plz let me know what is the exact problem. Asks: - Do you have allready read in the correct %TE parameters ? - What alarm do you have to? - Are the PLC-Programm is correct. - Move any axis from the machine. - What Power-Units do you have ? - Do you have a alarmnumber fron PLC-Alarms. rageshwari Dear Expert, Also When I am tryig to edit R parameter it is giving alarm parameter inhibited means I canot edit the parameter(R par only)((I have kept toggle switch up position on 3840 board)),, also I can take upload through winpcin but No download is possible, plz let me know why download is not possible. R-Parameter edit --> what is the Alarm-Number, which number do you want to edit? PC-IN --> Parameters for Baudrate, parity . . . is O.K. ? Regards Karl
	Karl
Suggestion To thank Quote Answer

4/25/2012 4:31 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 8/22/2023 Posts: 196 Rating: (5)	Yes I have checked baudrate parameter 411 & 412. Upload is coming but no download is possible .

Suggestion To thank Quote Answer

4/25/2012 9:35 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 12/8/2023 Posts: 1502 Rating: (176)	Hi rageshwari Yes I have checked baudrate parameter 411 & 412. Upload is coming but no download is possible . Please write a little *MPF*-Programm. Try to read in and out ! ! ! If this is not work, check your cable. Regards Karl
	Karl
Suggestion To thank Quote Answer

4/27/2012 9:14 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 8/22/2023 Posts: 196 Rating: (5)	I have change cable now.The CNC is taking the data in but when i check it is not getiing updat.Means i have downloadeed the R parameter in the CNC now the backup is geting downloaded but when i chake R parameter they are not geting update. Is there any write protection.(I hvae kept toggle switch on 3840 card upper position, & service switch at 0 position).

Suggestion To thank Quote Answer

4/29/2012 10:25 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 8/22/2023 Posts: 196 Rating: (5)	Plz help me Why parameter are not geting updated even after downloading of the parameters.

Suggestion To thank Quote Answer

4/29/2012 10:31 AM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 12/8/2023 Posts: 1502 Rating: (176)	Hi Please answer my question. Regards Karl
	Karl
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on