Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tag comments for tags in WinCC

Created by: vidarv at: 3/1/2006 1:11 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/1/2006 1:11 PM	Rate (0)
vidarv Posts: 66 Rating: (1)	To get tags for my S7 project integrated in WinCC I have enabled the block for OC&M functions (operator control and monitoring) and compile the data for my WinCC application in the SIMATIC Manager. The tags then appear in the WinCC application. But the tag comments are not included ? Aren the comments from S7 project (PLC program) avavilable in WinCC? Is enetring of comments for tags possible in WinCC? Vidar .
vidarv Posts: 66 Rating: (1)
Suggestion To thank Quote Answer

3/1/2006 2:20 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Unfortunately WinCC tags do not have comments [:(]

Suggestion To thank Quote Answer

3/1/2006 2:26 PM	Rate (0)
vidarv Posts: 66 Rating: (1)	Thanks Salma. Bad news[:(] But at least I know and do not need to use any more time on the issue! Vidar
vidarv Posts: 66 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on