Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tag logging (compressed archive) problems

Created by: soepie at: 1/14/2008 11:25 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/14/2008 11:25 AM	Rate (0)
soepie Posts: 13 Rating: (0)	WinCC V6.2: Using a compressed archive (tag logging) I encountered some problems: 1.Some values are shown with a line through the value, others don't (see attachment). I created a compressed archivewhichis shown on a screen using WinCC Online Table Control.At the tab "General"I activated the option "Common Time Column".Some values are shown as expected while some howevershow a line through the value (striked through font as shown in attachment). When I deactivate the option "Common Time Column"thevalues are shown correctly without a line through it but then I have for every value a Time Column. I noticed that some values are compressed at a slightly different time than the others whichI presume is causing the striked through characters when using only one Time Column. How can I show a compressed archive with no Time column at all (or only one Time column) andhave the values shown withoutthe line through the numbers ? 2. The same problem occurs when putting the archive in a Report. Trying to outsmart WinCC by deactivating "Common Time Column"(every value gets a time column now) but setting the relative columnwidth of the Time Columns to"0"actually worked in Report Designer. However in the actual printout the columns arevisible despite the columnwidth of "0" (What You See IsDEFINITELY NOT What You Get). How can I switch off columns in a Report / WinCC online Table Control ? Attachment CompressedStrikeThrough.JPG (189 Downloads)
soepie Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

1/30/2008 4:02 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, according point 1 see FAQ http://support.automation.siemens.com/WW/view/en/17614082
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on