Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tag logging WinCC 6.0 SP1 not collect data

Created by: anhtuani3t at: 5/8/2008 3:37 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/8/2008 3:37 AM	Rate (0)
anhtuani3t Posts: 1 Rating: (0)	Hi everyone, Now i'm using WinCC 6.0 for my project. When i use tag logging function to collect data ( internaland extennal from PLCs ) but i don't know why the data can't display on OnlineTable Control on Graphics Designer. All configure for this function i have done step by step like description in WinCC Configuration manual and help. Sometimes, data appearon Online Table Control, but after that it's lost and never display again although i have no change on configuration. I think the configuration for this function it's not difficult and complex, but don't know why, haveany one cantell me the reason and how to solve it? Very thanks.
anhtuani3t Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/13/2008 11:54 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, have You heard about WinCC diagnostic files. Just search in the FAQs for diagnosticor trend trend control or table control see for example http://support.automation.siemens.com/WW/view/en/22286050
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on