Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tag property

Created by: Import-User-1 at: 8/30/2005 1:37 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/30/2005 1:37 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Hi, I would like to retrieve the high and low limit from a tag that is connected to a plc. Would I can see is that I can rerieve the tag value, error, and some other values in VBS. Can you tell me how I can retrieve the high limit and low limit? Even retrieving the requested properties with the use of ODK is allowed, but I can 't find out how to do this. Thanks in advance, With Regards, Joost
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

8/30/2005 1:37 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	This is just possible with WinCC ODK funcitons. I have attached you a link to a FAQ where you will find a contact for WinCC ODK. ==>> http://support.automation.siemens.com/WW/view/en/9652128 Best Regards Technical Support

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on