"TAK" function simatic S5 program

Hello Expert,

I have simatic S5 program like this :

C DB 100

L KS  00

L DW 11

!F

= F 200.0

TAK

L DW 12

!F

= F 200.1

TAK

L DW 13

!F

= F 200.2

And want to ask, What is "TAK" and How to write or to convert in S7 program?

Thanks and Best regard

Lekon

Hello Expert,

I have simatic S5 program like this :

C DB 100

L KS  00

L DW 11

!F

= F 200.0

TAK

L DW 12

!F

= F 200.1

TAK

L DW 13

!F

= F 200.2

And want to ask, What is "TAK" and How to write or to convert in S7 program?

Thanks and Best regard

 Dear Lekon

You can refer to this link and manuals availabel at

https://support.industry.siemens.com/tf/ww/en/posts/faqs-and-tips-for-s5-to-s7-conversion/145847/?page=0&pageSize=10

The command is in STEP 7 Classic the same as in STEP5.

TAK (Toggle ACCU 1 with ACCU 2) exchanges the contents of ACCU 1 with the contents of ACCU 2. The instruction is executed without regard to the status or influence. The contents of accumulator 3 and accumulator 4 remain unchanged (for CPUs with four accumulators).

Ok thank very much ALL My Expert for all information

Best regard

New question published by Oybekxuja is split to a separate thread with the subject Help me convert code stl to scl in step 7 V5.6.

Best regards
The Helping Hand