Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TC35i Firmware

Created by: Christoph85 at: 2/17/2010 2:44 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

2/17/2010 2:44 PM	Rate (0)
Christoph85 Posts: 13 Rating: (0)	Hello, I'm using the TC35i GSM-Modem. I would like to parameter the AT-Command CNMI as: "at+cnmi = 2,2,0,0,1" But my TC35i (Rev 4) is only able to use +CNMI: (0-3),(0,1),(0,2,3),(0,2),(1) So the second Parameter can not be used in mode 2. Now I'm searchingfor a firmware update that I can use mode 2. Thanks for help
Christoph85 Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

2/19/2010 4:42 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, please contact MC Technologies about this product. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

2/28/2010 5:39 PM	Rate (0)
pesa2k Posts: 11 Rating: (1)	Hi, I am trying to commission a TC35i terminal with PC Application. I have established the communication with the Modem. And I am able to send SMS through the Modem. But I am facing problems with SMS receiving. When I tried to send the command read all mesage list "AT+CMGL=ALL", the terminal response is "OK". Instead of "+CMGL: <index>, etc". I tried to send messages from other mobiles and I am getting delivered receipt in the mobile. I tried to setup extended error reporting also but it is not giving any error. When I try to send the command "AT+CMGL=REC UNREAD" I am getting "error" message. Could you please help me solve the problem? Thanks in advance.
pesa2k Posts: 11 Rating: (1)
Suggestion To thank Quote Answer

3/1/2010 3:35 PM	Rate (0)
Christoph85 Posts: 13 Rating: (0)	Try to activate the text mode before AT+CMGF=1<CR> by the way, contacting MC Technologies was a good idea, they have actual informations about this product
Christoph85 Posts: 13 Rating: (0)	Last edited by: Christoph85 at: 3/1/2010 3:37 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users J_Bell

8/26/2013 10:49 AM	Rate (0)
Blue Moderator Platinum Member Joined: 4/21/2006 Last visit: 1/14/2025 Posts: 510 Rating: (24)	New question was splitted to TC35i : Send/Receive Application.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on