9/11/2020 7:30 AM | |
Joined: 8/25/2006 Last visit: 5/2/2024 Posts: 2203 Rating: (277)
|
Hello. You need only to install SP3 for D7-SYS V6.2 to be able to configure CP50M1. New CPU551 (0BA2) is not available in HWConfig, it should be configured as old (0BA1). Do you have any user libraries in your project? You could leave old versions of libraries using CFC-menu 'Options-Customize/Download-System data from archive' before installing new D7-SYS version. Standard libraries could be updated as usual (CFC-menu 'Options-Block types-New version'). |
9/29/2020 4:10 PM | |
Posts: 9 Rating: (0) |
Hello, yes, HW connectors should be right as well as Baud rates. |
9/29/2020 5:31 PM | |
Joined: 8/25/2006 Last visit: 5/2/2024 Posts: 2203 Rating: (277)
|
On the FW updates page for CP50M1 it is written that you require Step7 V5.3 SP3. Also on this page it is written that you require CFC V6.1 SP1 for using SP3 for D7-SYS V6.2. Install above mentioned SP's for Step 7 and CFC and try again. |