Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Technology goes offline in SINAMICS with a CPU315T

Created by: James_fsm at: 8/26/2010 5:01 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/26/2010 5:01 PM	Rate (0)
James_fsm Posts: 13 Rating: (1)	Dear Experts: I have a CPU315T and a SINAMICS S120 CU320. When I go online with S7T CONFIG eveything works perfectly. The problem comes after 3 seconds... Technology goes OFFLINE and the message reads: "Technology has gone offline" in thetop of the frame reads as well "Technology offline [wwbs. 41556]". I´ve already turned the motors on, move them with the Control Panel. Anyway I need technology goes online to add the axis. Does anyone know what´s happening? I´ve tried a lot of things, please help me! ·Step 7 y SP: V5.4+SP4 ·Technology Version: CPU315T: V2.6.5/4.1 ·Version XP: Profesional 2002, Service Pack 3 ·SIMATIC S7T Config: v4.1.2.0
James_fsm Posts: 13 Rating: (1)
Suggestion To thank

8/27/2010 10:30 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 9/18/2024 Posts: 4104 Rating: (195)	closed cause question posted more than once. Please discusse this question within the thread Technology goes offline with SINAMICS S120 with a CPU315T. This thread is published within the conference SINAMICS. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on