Hello, we have two machine system networks (A and B) with around 10 ip devices at each machine. One of them (A) has already the TS Adapter IE Advanced for remote service. Is it possible to use it for connecting the second machine (B) for Teleservice? 

The IP addresses can be configured accordingly, but would prefer to be on a different subnet and not communicating with each other. At the moment machine network A is using 192.168.0.xxx and the other machine network B 192.168.3.xxx.

Hello thanozn

Im not sure if it could work because the TS Adapter acts a an router or Gateway so you have to configure it in every Device as Router/Gateway so that if you communicate to outside that they know the way out. But in two different subnets you cannot get access so easily.

Perhaps if you try to use Subnetmask 255.255.0.0 instead of 255.255.255.0. Give it a try with Ping.

Bye Murof

New question published by Rikimma is split to a separate thread with the subject Communication problem through a ts-adapter .

Best regards
Jen_Moderator

OK, Thanks