Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Temperature ahould be diaplay in softkey

Created by: Y.DHINAKARAN at: 6/16/2010 12:12 PM (6 Replies)

Rating (0)

Thanks 1

7 Entries

6/16/2010 12:12 PM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi, I am using 840D PCU50 in a VTL machine. We are providing external chiller unit for cooling the oil. I need to display the temperature of the oil in the softkey. Please advice.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/16/2010 12:48 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... There is no sofkey for displaying the temperature of the OIL in 840D. You need develop a screen(Protool Pro/Wincc) there you can develop a softkey and use it. Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/16/2010 3:03 PM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi Ekalavya, Please send the procedure, it will helpful for me. Thanks Y.Dhinakaran.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/16/2010 4:18 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 1/22/2025 Posts: 595 Rating: (64)	Hi. Protool or WinCC is an option for PCU50. You can create simple user screens using usual text files. The description in "Commissioning CNC Part 2 (HMI)"-> "Expand User Interface" (BE1). Example: we create the user screen in screen "Maschine", a mode "JOG". File ma_jog.com: ; $PATH = / _ N_CUS_DIR (in f:\dh\cus) //S (Start) HS1 = ("Example", ac7) PRESS (HS1) LM ("Test") END_PRESS //END //M (Test / "MyTest"/) DEF VAR1 = (R///, "Y:", ""/wr2, ac4//"$MN_USER_DATA_FLOAT [0]"/50,55,200/100,55,120/3,10) HS1 = ("MyTest", se3, ac7) .... VS8 = ("OK") RECAL = () PRESS (HS1) LM ("Test") END_PRESS PRESS (VS8) EXIT END_PRESS //END Little bit big efforts allow to create various variants. You can read or change various variables. "Example.jpg" is one of variants. Best regards. Attachment Example.jpg (144 Downloads)
	Last edited by: pfuser at: 6/16/2010 4:21 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

6/16/2010 4:26 PM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	hi pfuser, I am using external temperature sensor in chiller unit. How i can read the temperature from sensor to HMI user screen. Please advice......... Y.Dhinakaran.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/16/2010 4:43 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 1/22/2025 Posts: 595 Rating: (64)	Hi. The information read in MW (DB etc) from sensor. MW display in HMI user screen. Best regards.

Suggestion To thank Quote Answer

6/16/2010 10:38 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 1/22/2025 Posts: 595 Rating: (64)	Hi. In addition. You can display the information on temperature by means of drawing in the form of the thermometer. Best regards.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on