Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Temperature Scaling

Created by: Cheetos at: 10/21/2009 4:41 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/21/2009 4:41 PM	Rate (0)
Cheetos Experienced Member Joined: 7/8/2009 Last visit: 9/20/2022 Posts: 56 Rating: (0)	Hello Every One About The Temperature Scaling From Analog Input Module the entry ID 1765297 From The FAQ explains that Concerning the Temp Scaling there is a Difference in Scaling between "Thermometers configured in the standard range " and "thermometers configured in the climate range" Whether Division By 10 or 100 . My Question is the How to Know if the Thermometers is configured in the standard range or configured in the climate range And what is meant Exactly by "configured in the standard range" and "configured in the climate range" !!!!!! Thanks Guys

Suggestion To thank Quote Answer

10/21/2009 6:50 PM	Rate (0)
SteveA Posts: 297 Rating: (41)	The temperature range is selected in Step 7 HW Config, in the Input properties for the analog input card. The available measuring ranges will have a Cl. or Std. after each entry, for example Pt 100 Cl. The sensor is the same in either case, but the analog card adjusts its result based on the selection. You can get either higher resolution and a restricted range with the Climate selection, or lower resolution and a wider range with the Standard selection. HTH, SteveA
SteveA Posts: 297 Rating: (41)
Suggestion To thank Quote Answer

10/22/2009 4:12 PM	Rate (0)
Cheetos Experienced Member Joined: 7/8/2009 Last visit: 9/20/2022 Posts: 56 Rating: (0)	Dear Steve Thanks very Much . your answer was Perfect and Helpfull

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on