Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TEST WinCC Flexible RUN & S7 300

Created by: mich23 at: 3/30/2010 10:25 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

3/30/2010 10:25 PM	Rate (0)
mich23 Posts: 29 Rating: (0)	Hi EXPERTS... I´m trying to RUN my program (designed in WinCC Flexible Advanced 2007) in my PC (personal computer). It´s connect MPI way to the S7 300 (CPU 314). Some minutes ago, I upload my program to the S7 300, and it was OK. But right now, I don´t have a Touch Panel, thas I´m trying to RUN (winCC program) with my PC. is it posible to do??? do I need some advices for this task ??
mich23 Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

3/31/2010 8:09 AM	Rate (0)
fbelic Posts: 327 Rating: (28)	Greetings Are you asking is it possible to run a WinCC flexible project for TouchPanel on your PC? Then the answer is yes. Just make sure that PG/PC Interface is set correctly and start runtime... Best regards
fbelic Posts: 327 Rating: (28)
Suggestion To thank Quote Answer

3/31/2010 9:23 PM	Rate (0)
mich23 Posts: 29 Rating: (0)	Yes, That´s the question. But How ?? maybe some Address orwhat?? If you have the steps, please let me know. Thank you.
mich23 Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

4/1/2010 9:04 AM	Rate (0)
fbelic Posts: 327 Rating: (28)	You didn't give enough information.... But, you are using MPI for connection between PLC and Panel... So I presume you are using it to download program to PLC, too? Then, in SIMATIC Manager, open "Options"->"Set PG/PC Interface", select MPI address of PC to match MPI address of Panel. Then open WinCC flexible, and start "Project"->"Compiler"->"Start Runtime". It is actually quite simple... Best regards
fbelic Posts: 327 Rating: (28)
Suggestion To thank Quote Answer

4/1/2010 4:51 PM	Rate (0)
mich23 Posts: 29 Rating: (0)	you are right.... I didn´t tell you exactly information... excuse me. But, yes I´m setting the interface PG/PC, the conections in WinCC Flexible, and then I compile the program. Everything was OK. Thank´s a lot dear EXPERT.
mich23 Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

4/2/2010 7:31 AM	Rate (0)
fbelic Posts: 327 Rating: (28)	No problem, glad to help. Best regards
fbelic Posts: 327 Rating: (28)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on