Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Text I/O

Created by: dguarello at: 8/4/2008 3:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/4/2008 3:39 PM	Rate (0)
dguarello Posts: 22 Rating: (0)	Is posible than the operator write some observations in WinCC runtime, and after this observations could be printed in one report. It`s must be a I/O text.
dguarello Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/4/2008 6:33 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	This should be very easy. Create an internal Tag of Text Tag Type. In the graphics add IO field with String format with this Tag as the value. Now in report, create an output field of this tag. But I think you should consider operator input message feature also. Notes on generating an operator input message are available in the WinCC Online Help under "WinCC Information System > Working with WinCC > Setting Up an Alarm System > Alarm Logging in WinCC".
JMJ Posts: 487 Rating: (45)
Suggestion To thank Quote Answer

8/4/2008 6:57 PM	Rate (0)
dguarello Posts: 22 Rating: (0)	It`s works, but i want that works like a text editor.
dguarello Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/4/2008 10:00 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	Try using some text box active-x control
JMJ Posts: 487 Rating: (45)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on