Industry Online Support
Technical Forum
1/11/2010 10:10 AM | |
Posts: 6 Rating:
|
Hello! It seems I have the same problem on my 840 Di. The spindle override switch is not working. I suspect the problem is in the Step 7 program (transcript included below). Any ideas how to solve it. I tried the sollutions in this thread, but nothing worked (I admit me and my programming could be a part of the problem Thanks, Janez AttachmentOB1.zip (195 Downloads) |
Last edited by: O_Moderator at: 1/12/2010 8:28 AMnew subject after splitting from /tf/WW/en/Posts/27063#top |
|
Follow us on