Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

The task of obtaining the encoder signal

Created by: last85 at: 10/26/2018 3:16 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/26/2018 3:16 PM	Rate (0)
last85 Advanced Member Joined: 3/13/2018 Last visit: 5/20/2022 Posts: 57 Rating: (0)	Hello to all. I have a CU-310-2PN drive with an encoder connected to it. The task is to get the encoder signal from this drive for use in external equipment. Maybe there are some additional modules to this drive that can perform similar tasks? Can someone help me in solving this problem?

Suggestion To thank Quote Answer

10/26/2018 4:24 PM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 10/11/2024 Posts: 4750 Rating: (726)	Have a look at a TM41 module.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

11/1/2018 8:24 AM	Rate (0)
last85 Advanced Member Joined: 3/13/2018 Last visit: 5/20/2022 Posts: 57 Rating: (0)	Thanks for answer. I connected TM41 via Drive CLIq to the control unit CU 310, but i dont quite understand what to do next. Can somebody help me with some manual or instructions? Sorry for newbie question. Here i am attaching a video that shows how i connected TM41 to the drive. That video shows that the Ready indicator is steady orange. [snip]
	Last edited by: Jen_Moderator at: 11/5/2018 7:51:05 AM Removed link, because it isn't visible as safe.
Suggestion To thank Quote Answer

11/5/2018 2:15 PM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 10/11/2024 Posts: 4750 Rating: (726)	https://support.industry.siemens.com/cs/ww/en/view/48956841
	Last edited by: jacek d at: 11/5/2018 2:15:53 PM Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on