Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

the timer fb115 counts very slow

Created by: overgeo at: 3/11/2007 2:42 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/11/2007 2:42 AM	Rate (0)
overgeo Posts: 13 Rating: (0)	Hi i,m trying to use the block, but Here you can see a description of the block. https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&csquery0=timer&caller=view&nodeid0=14226453&lang=en&siteid=cseus&aktprim=0&extranet=standard&objid=10805384&DataKey=10805384&treeLang=en But when i use the block, and i set the timer to ten seconds for example, the timer counts ten seconds but very slow, i mean the cpu takes many time to reach the ten seconds (one minute more o less), can anyone tell me waht's going on? anybode has the same problem?, greetings and thanks in advance.
overgeo Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

3/11/2007 11:45 AM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 2/16/2023 Posts: 2705 Rating: (311)	HI, I want to look but I couldn't find the software you mentioned, please use Copy linkon the downside on the left of the FAQ, Handbook, Approval etc.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

3/11/2007 5:15 PM	Rate (0)
overgeo Posts: 13 Rating: (0)	thanks for your answer the direct link is this fb115 "How do you program a timer that retains the time value at STOP and counts on starting at the stored value?"
overgeo Posts: 13 Rating: (0)	Last edited by: overgeo at: 11.03.2007 17:15
Suggestion To thank Quote Answer

3/12/2007 11:11 AM	Rate (0)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 5/26/2023 Posts: 4161 Rating: (642)	What did you enter as Tbase and Preset parameters ?
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

3/12/2007 4:29 PM	Rate (0)
overgeo Posts: 13 Rating: (0)	Hi, thanks for your answer, i have tried different configurations and in all of them the cpu counts slow, for example for 10 seconds, i have tried tbase = 1 and preset=999 , or tbase = 2 and preset = 10. And in the output number i see the time that is counting and stops in the 10 seconds, but as i said before takes many time to reach the 10 seconds. Regards and thanks.
overgeo Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on