The use of S7-300 I/O modules on the ET 200S

Hi;

I have up than 60 I/O, and i'm using the ET 200S, looking on his I/O modules there is not more than 4 DI on one module.

So, i am asking, can i use the I/O modules of S7-300 which contain 16 or 32 DI with my ET 200S.

I know that there is no problem with ET 200M but is it the same for ET 200S?

Thanks.

Hello HH21;

You cannot use ET 200M modules within a ET 200SP station.

The hardware and electronics are too different between distributed I/O families.

For quick overview of different ET 200 families, examine the contents of this preentation document:

ET 200 distributed I/O

You can setup an ET 200M station as  Profibus or Profinet station controlled by an ET 200 CPU, for example.

Hope this helps, 

Daniel Chartier 

Hello Daniel Chartier; 

Like always your responses are so helpfull, Thank you.

you can reach the 60 io with et200s since it takes up to 63 modules

regards 

ahmed hamad