Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

The user does not have rights to perform this action!

Created by: Obenam at: 4/7/2009 11:34 AM (16 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

4/7/2009 11:34 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hi I have Problem with opening a written project by WinCC v6.2 that is executable on others PCs.When I try to open it,this error occure: "The user does not have rights to perform this action!Please check the assignment of the current user of the user groups in windows." I checked it and my user was defined in SIMATIC HMI and SIMATIC HMI VIEWER.I searched internet but I couldn't find any solution.It's interesting that I can open and activate a sample project that I downloaded it form siemens site!!!Please help me to find the solution. Regards. Behnam Razi
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

4/7/2009 1:27 PM	Rate (0)
Obenam Posts: 49 Rating: (0)	Please someone help me in this topic.I'm in big trouble!!!
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

4/7/2009 1:49 PM	Rate (0)
Tubbie Posts: 52 Rating: (3)	hi there, the problem is, the windows user groups for wincc are ranked. the lowest rank is simatic hmi viewer (with nearly no rights...only view wincc) next simatic hmi cs (more rights, wincc can be modified) then simatic hmi (something like administration level of wincc with all rights) the group simatic hmi is administration level. if your user is in viewer & cs group only the rights of this group decide what actions can be performed and which can not. although the user is in the "simatic hmi" group. the lowest group counts and set the rights for the user so kick the user out off the group "simatic hmi viewer" and it should work. regards tubbie
Tubbie Posts: 52 Rating: (3)
Suggestion To thank Quote Answer

4/7/2009 2:16 PM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hi Tubbie I did what you told but no change is appear!!!I'm perfectly confused.Still I can't open the written project,but i can open downloaded sample! regards. Behnam
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

4/7/2009 3:03 PM	Rate (0)
Tubbie Posts: 52 Rating: (3)	hi, can you check and post the groups your user belongs to? does it work before? what changes have you made?
Tubbie Posts: 52 Rating: (3)
Suggestion To thank Quote Answer

4/7/2009 5:29 PM	Rate (0)
uel123 Gold Member Joined: 1/29/2006 Last visit: 9/11/2024 Posts: 446 Rating: (64)	Hi there, Behnam! You also have to be a member of Administrators grop in Windows!! have fun! uel123

Suggestion To thank Quote Answer

4/9/2009 7:06 PM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hi Iadd my user in any groups of user group and as Tubbie said I remove it of HMI viewer group but no chang appear.It's Friday and here is holiday,but as soon as I can check the computer i'll list all user groups of my computer. Regards. Behnam
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

4/10/2009 8:58 AM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 8/28/2024 Posts: 917 Rating: (63)	Hi Obenam, sometimes happens you are nt able to open project when you move it from irugnal statio to other one; usually when you make a copy over CD. When you restore the project from CD it's still keeping Read Only attribute (dunno why). If it's your case try to remove every read only atribute from project files by Windows Explorer, just for test. Regards

Suggestion To thank Quote Answer

4/11/2009 6:09 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hi I took a picture of user groups and attached it to this post. I checked the files of project and none of them was Read_Only file! My user is a member of Administrators, Network configuration operators, Power Users, Users, SIMATIC HMI and SQLServer groups. I forgot to say that I haven't install SIMATIC S7 on my computer yet and the project use external tags of S7. Could this error because of that? Or it should open the project??? Regards Obenam Attachment users.JPG (675 Downloads)
Obenam Posts: 49 Rating: (0)	Last edited by: Obenam at: 4/11/2009 6:39 AM Last edited by: Obenam at: 4/11/2009 6:34 AM
Suggestion To thank Quote Answer

4/11/2009 8:16 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	uel123 Hi there, Behnam! You also have to be a member of Administrators grop in Windows!! have fun! uel123 Hi uel123 My user is a member of Administrators group too!!! Regards Obenam
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on