Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

there is no connection betwen pc and cnc

Created by: SEALJET-IP4500 at: 2/8/2009 3:05 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/8/2009 3:05 PM	Rate (0)
SEALJET-IP4500 Posts: 3 Rating: (0)	hello all I USE SINUMERIK 810 SIEMENS PANEL 4.5 VDB SOFTWERE UNDERWIN95/98/ME AND NT4.0 PACK 4 I HAD TRY WITH WIN98 BUT NO RESULT I HOPE TO STAY WITH THE XP WIN PACK2 I HOPE TOBE HELP AND TO SPEAK WITH SOMEONE WHO HAS SEALJET-IP4500 IT S A CNC TURNING FOR INDUSTRIAL SEALS BEST REGARDS
SEALJET-IP4500 Posts: 3 Rating: (0)
Suggestion To thank

2/8/2009 10:27 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/24/2023 Posts: 4099 Rating: (193)	closed cause question posted twice. The second thread with the subject NO CONNECTION BETWEEN SINUMERIK AND PC is published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on