Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TI soft version 5.0

Created by: viki_bum at: 8/19/2011 1:42 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/19/2011 1:42 PM	Rate (0)
viki_bum Posts: 23 Rating: (0)	Dear ..... Please tel me how to load ladder logic in TS545 i have ladder logic and softerware but dont know how to use it. regards Vikki
viki_bum Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

8/19/2011 2:23 PM	Rate (0)
billwest Posts: 510 Rating: (117)	Vikki, Here is a link to download the V6.2 manual. Basic upload and download functions have not changed between the versions. http://support.automation.siemens.com/WW/view/en/1937294 Themanual also has a pin out for the programming cable if you need to make one. I have had TISOFT running on XP but I have not tried it under Windows 7. billwest
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

8/22/2011 3:15 PM	Rate (0)
billwest Posts: 510 Rating: (117)	Start TISOFT Select F4 (Online) After you are online with the controller,select F6 (AUX) Drill down to AUX 90 AUX 90 loads ladder memory, V-memory, K-memory, U-memory, Series 505 I/O configurations for all bases, PROFIBUS-DP I/O configurations for all slaves, bus parameters for the PROFIBUS-DP I/O channel, memory configuration, scan time, and watchdog timer value. AUX 90 does not load forced word I/O or forced discrete I/O (X, Y, and C). Chapter 11 of the TISOFT Manual goes into the AUX functions If you are reloadinig the existing program you don't have to clear the memory. If you are loading a new program, use AUX 13 to clear the memory Good Luck Bill
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on