Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal and servo drive S110

Created by: sdus at: 3/12/2013 11:51 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/12/2013 11:51 AM	Rate (0)
sdus Posts: 3 Rating: (0)	Hello, I'm posting this thread because I would need help for setting the link between a servo drive S110, CU305 PN and a ET200S CPU IM151 8 PN. I've been searching for project examples or threads on this subject but I didn't find any. I don't know how to connect both devices for them to communicate together. I would like to use the PZD 110 and PZD 390. For now the setting is like in the picture attached. The purpose of this project is to control the servo drive in MDI mode. Thank you, Solène
sdus Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/14/2013 10:25 AM	Rate (0)
sdus Posts: 3 Rating: (0)	Hello, I'm still in trouble with my settings. Maybe this is not exactly the forum where I should have post this thread but I don't know in which one I should post that... Could you tell me what is the appropriate forum? Thank you very much, have a nice day
sdus Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/15/2013 2:36 AM	Rate (0)
JWilson Experienced Member Joined: 9/16/2008 Last visit: 1/26/2023 Posts: 49 Rating: (3)	Post your project We can look at it and see what may be the problem

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on