Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal (V11) Crashes after clicking on button "project view"

Created by: Smurf at: 5/30/2011 1:56 PM (37 Replies)

Rating (17)

Thanks 13

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

3/13/2013 11:56 PM	Rate (0)
Collett Member Joined: 11/21/2008 Last visit: 3/1/2023 Posts: 1 Rating: (0)	Hi. I have spent 7 days (on and off) trying to install TIA Portal V11. Have tried SP1, SP2 andupdate 5.I have installed from DVD, from local HD and from usb HD. Always the install reports a problem but no details. I have tried the S7Dos fix. The program runs but crashes with the usual unhelpful message. I have raised a support request, germany have been involved. They have stated that it cannot be installed on a domain based machine and yet we have a new domain based machine that it is ok on. I have successfully installed on a virtual XP machine and it runs fine but cannot connect to a KP900. I have used it on an old XP machine for 3 days before the message popped up. Given the price we pay for the software we should send them a bill. Very frustrated.

Suggestion To thank Quote Answer

3/14/2013 1:49 AM	Rate (1)
Mike.Mc Posts: 46 Rating: (8)	I have wrestled with that for 3 years. It never goes away. My solution is to create a new project and copy, (drag and drop), your CPUs and HMIs into the new project. Sometimes they do not drag over. I suspect those devices are the ones with the problems. Then create a new device, (always a CPU), and copy OBs, DBs, tags etc. into the new device. That cleans it up and TIA Portal works great until it happens again...
Mike.Mc Posts: 46 Rating: (8)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users freiwild

6/13/2013 12:57 PM	Rate (0)
freiwild Posts: 1 Rating: (0)	Thanks Mike.For me TIAallwayscrashed at starting runtime simulation. Your solution is working for me as well.
freiwild Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/11/2015 2:51 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by AndreyM89 is split to a separate thread with the subject delete all existed projects in TIA. Best regards Min_Moderator

Suggestion To thank Quote Answer

2/14/2015 6:51 AM	Rate (0)
Javicho2006 Posts: 3 Rating: (0)	It doesn't work. I'e formated my pc an istalled all tia v11 sp2 upd5 on my pc w7 64bits. No solution in 2015
Javicho2006 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

5/18/2016 1:36 PM	Rate (0)
mods315 Member Joined: 11/23/2012 Last visit: 10/20/2020 Posts: 6 Rating: (0)	The program crashes on clicking on the TIA portal icon or when trying to open a project file. The error message is "Siemens.Automation.Portal has stopped working" I have tried deleting the s7DOS folder, restarting the Notebook etc. I have tried opening old programs. I cannot create a new project because the portal does not open enough to allow this. All I get is the TIA portal window and then a windows error message. I have not yet tried reloading the software but will that help anyway? The program did open once when I ignored the error message by not clicking on it, but then crashed shortly after with a new error message: "Siemens.Automation.ObjectFrame.FileStorage. Server has stopped working" I have windows 7 and it is a 64 bit CPU. Anyone have any idea what I can do or what it might be? Unable to get on with the urgent job I need to finish. Thanks.
	Last edited by: mods315 at: 5/18/2016 1:40:32 PM Last edited by: mods315 at: 5/18/2016 1:55:24 PM
Suggestion To thank Quote Answer

5/18/2016 3:11 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/3/2024 Posts: 15455 Rating: (2452)	Several things could be going on. Have you tried to repair the installation via windows->control panel? Have you tried uninstall, re-install? (assuming the repair does not work) Have you tried a second laptop and install there in the event you cannot get it going in time to meet your urgent need? mods315 The program crashes on clicking on the TIA portal icon or when trying to open a project file. The error message is "Siemens.Automation.Portal has stopped working" I have tried deleting the s7DOS folder, restarting the Notebook etc. I have tried opening old programs. I cannot create a new project because the portal does not open enough to allow this. All I get is the TIA portal window and then a windows error message. I have not yet tried reloading the software but will that help anyway? The program did open once when I ignored the error message by not clicking on it, but then crashed shortly after with a new error message: "Siemens.Automation.ObjectFrame.FileStorage. Server has stopped working" I have windows 7 and it is a 64 bit CPU. Anyone have any idea what I can do or what it might be? Unable to get on with the urgent job I need to finish. Thanks.
	science guy
Suggestion To thank Quote Answer

11/7/2023 5:29 PM	Rate (0)
safe_acid Posts: 1 Rating: (0)	I have a similar issue with VMware Fusion on my Mac mini M2. The solution for me is to install the original TIA 17 portal and then upgrade it to version 6. Currently, I can start my projects, but I haven't tested them on a physical PLC yet. I hope it will work as well. Attachment Screenshot 2023-11-07 at 19.28.38.png (383 Downloads)
safe_acid Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on