Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal V11 SP1 Update 1

Created by: mjrv at: 9/16/2014 8:24 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/16/2014 8:24 AM	Rate (0)
mjrv Bronze Member Joined: 7/4/2014 Last visit: 8/9/2024 Posts: 283 Rating: (0)	Dear Sir I am new to this TIA Portal TIA loaded in Field PG, with Unlimited license type for WinCC basic V10.5 and Step 7 Basic V10.5 We are able to get connected with S71200 PLCthro LAN cable , v cud create Project, v cud add PLC, also able to Go Online, do Start and Stop PLC, use Flash LED to identify connected PLC but unable to uploade project from CPU to Field PG because "Load from Device " or Upload device to PG/PC is not active although "Download to device " is active Kindly advice

Suggestion To thank Quote Answer

9/16/2014 8:49 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/14/2025 Posts: 8804 Rating: (1173)	Hello mjrv, Please have a look at the following thread: /tf/WW/en/Posts/114443 Best regards, Wizard

Suggestion To thank Quote Answer

9/16/2014 11:14 AM	Rate (0)
mjrv Bronze Member Joined: 7/4/2014 Last visit: 8/9/2024 Posts: 283 Rating: (0)	Sir After sending the post we could fix the problem a) LAN connection was not ok with limited access, changed IP in line with IP of device, disable and enabled LAN b) For PLC backup, went online, selected program blocks, then Load from device got active c) For HMI, we need to click on screens Thus we could take PLC and HMI backup

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on