Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal V11SP2 Update5

Created by: PDGANGANI at: 5/30/2014 6:52 PM (10 Replies)

Rating (1)

Thanks 8

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

5/30/2014 6:52 PM	Rate (1)
PDGANGANI Posts: 165 Rating: (19)	Hello , Recently I am using TIA Portal V11 SP2 . Unfortunatly I am suffering very badly due to unexpected crashes while programming. Recent days i am not able to open Menu&Toolbar configuration ... I have created one Thread but cant solve problem..... After that I have created support request to siemens.. I Got a very accurate reply Dear Sir , Please install Update 5 for WinCC V11 SP2 The same can be downloaded from:- http://support.automation.siemens.com/WW/view/en/58112582 Now After Updating TIA V11 sp2 to Update-5 ..many of my problems solved. Menu and Toolbar configuration is working ok. Software stablity increases a bit. Hence , As per my experience If you are Using TIA V11 SP2 you should update your software Download Available in above link. But If it is possible to upgrade TIA V11 to V12 or V13 then you should go for that first.
PDGANGANI Posts: 165 Rating: (19)
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users BhaPraJ S7 AUTOMAN Lee.best Allen2

5/30/2014 7:02 PM
VVago Posts: 784 Rating: (52)	Nice thread.
VVago Posts: 784 Rating: (52)
Suggestion Quote Answer

5/30/2014 7:06 PM
PDGANGANI Posts: 165 Rating: (19)	Wago Nice thread. Thanks..
PDGANGANI Posts: 165 Rating: (19)
Suggestion Quote Answer

5/30/2014 7:14 PM
Lee.best Posts: 24 Rating: (0)	PDGANGANI Hello , Recently I am using TIA Portal V11 SP2 . Unfortunatly I am suffering very badly due to unexpected crashes while programming. Recent days i am not able to open Menu&Toolbar configuration ... I have created one Thread but cant solve problem..... After that I have created support request to siemens.. I Got a very accurate reply Dear Sir , Please install Update 5 for WinCC V11 SP2 The same can be downloaded from:- http://support.automation.siemens.com/WW/view/en/58112582 Now After Updating TIA V11 sp2 to Update-5 ..many of my problems solved. Menu and Toolbar configuration is working ok. Software stablity increases a bit. Hence , As per my experience If you are Using TIA V11 SP2 you should update your software Download Available in above link. But If it is possible to upgrade TIA V11 to V12 or V13 then you should go for that first. Nice Tipp for TIA V11
Lee.best Posts: 24 Rating: (0)
Suggestion Quote Answer

5/30/2014 7:18 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (994)	PDGANGANI Hello , Recently I am using TIA Portal V11 SP2 . ... But you have to change over to a newer version sooner or later, because newer PLC (i.e. S7-1200 FW4) are not supported any more.
IBN-Service Posts: 8946 Rating: (994)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

5/30/2014 7:31 PM	Rate (0)
PDGANGANI Posts: 165 Rating: (19)	IBN-Service PDGANGANI Hello , Recently I am using TIA Portal V11 SP2 . ... But you have to change over to a newer version sooner or later, because newer PLC (i.e. S7-1200 FW4) are not supported any more. DearIBN-Service, We must move on to TIA V12 or V13 if we don't want to suffer more. Because TIA V12 & V13 I found more stable version than TIA V11. But rite now I am working on a TIA V11 project so no option other than upgrading the software.
PDGANGANI Posts: 165 Rating: (19)
Suggestion To thank Quote Answer

5/30/2014 10:07 PM	Rate (0)
William_B Posts: 5225 Rating: (1165)	IBN-Service But you have to change over to a newer version sooner or later, because newer PLC (i.e. S7-1200 FW4) are not supported any more. High valued advise given away for free. Thank you "IBN-Service". Only TIA V13 will be able to program S7-1200 PLCs with firmware V4.0. These PLC CPUs can be identified by order numbers ending with "..40-0XB0" If you are running software prior to TIA V13, you should make sure you order the right CPU. The latest CPU version that TIA V11 and V12 can handle end with "..31-0XB0" in the order number (firmware V3.0). Firmware V3.0 CPUs should be available for a while longer. The advantages in using the newer CPUs make it worthwhile to upgrade. Greetings. w
William_B Posts: 5225 Rating: (1165)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PDGANGANI

5/31/2014 7:11 AM	Rate (0)
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 1/31/2023 Posts: 519 Rating: (83)	[quote user="PDGANGANI"]Hello , Recently I am using TIA Portal V11 SP2 . Unfortunatly I am suffering very badly due to unexpected crashes while programming. Recent days i am not able to open Menu&Toolbar configuration ... I have created one Thread but cant solve problem..... After that I have created support request to siemens.. I Got a very accurate reply Dear Sir , Please install Update 5 for WinCC V11 SP2 The same can be downloaded from:- http://support.automation.siemens.com/WW/view/en/58112582 Now After Updating TIA V11 sp2 to Update-5 ..many of my problems solved. Menu and Toolbar configuration is working ok. Software stablity increases a bit. Hence , As per my experience If you are Using TIA V11 SP2 you should update your software Download Available in above link. But If it is possible to upgrade TIA V11 to V12 or V13 then you should go for that first. Thanks for sharing your experience. It might help other to resolve issue regarding TIA V11. .
	Regards, BhaPraJ
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PDGANGANI

5/31/2014 9:48 PM
SolutionFinder Posts: 559 Rating: (87)	Good Job.
SolutionFinder Posts: 559 Rating: (87)
Suggestion Quote Answer

6/1/2014 6:57 AM
PDGANGANI Posts: 165 Rating: (19)	SolutionFinder Good Job. Thank You..SolutionFinder
PDGANGANI Posts: 165 Rating: (19)
Suggestion Quote Answer

|

Share this page:

Share this page on...

Follow us on