Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA PORTAL V12 SP1 FILE OPENING ERRORS

Created by: Import-User-1 at: 4/22/2014 9:03 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/22/2014 9:03 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Import of a Technical Question of the User shanmugam shanmugam Dear Expert, I am facing a problem in TIA portal V12 SP1 software,I have completed my HMI(tp 1200) project almost 90% of work.Now my final backup is not opening in my computer,while try to open the backup its giving pop massage like a project demage...... Note:i was tried to open the backup some others pc even though same error is apper... warm Regards by shan.
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

4/22/2014 10:25 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 12/18/2024 Posts: 1319 Rating: (176)	Add the project here or open a Service Request
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/30/2014 9:43 PM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 1/17/2025 Posts: 262 Rating: (5)	Dear Shan Kindly upload the same backup . Let me try the same. If the same problem is there it means either the backup is corrupted or some file is missing in that back up
	JAVED AKHTAR
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on