Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA portal V13: More then one Recipe in a project

Created by: Thien Nguyen at: 9/17/2014 10:25 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/17/2014 10:25 AM	Rate (0)
Thien Nguyen Posts: 50 Rating: (7)	Hello Working with Recipe with TIA portal V13 I want to have more than 1 recipe in my project but when I rigth click on the Recipe on the Project tree I can see this utillity. Is it not possible in TIA portal V13? In the good old WinCC Flexible I finde this utillity. Please take a look at my screenshot. Regards. Thien Attachment RecipeTIA_Porta.jpg (355 Downloads)
Thien Nguyen Posts: 50 Rating: (7)	Last edited by: Thien Nguyen at: 9/17/2014 11:52 AM and I use TP700 Last edited by: Thien Nguyen at: 9/17/2014 11:50 AM Excuse me! Here is the screenchot :)
Suggestion To thank Quote Answer

9/17/2014 10:56 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 2/2/2023 Posts: 8586 Rating: (1122)	Hello Thien, Please attach the screenshot. Can you tell, which panel you are using? Best regards, Wizard

Suggestion To thank Quote Answer

9/17/2014 12:50 PM	Rate (0)
DanielN Posts: 17 Rating: (2)	Wizard Hello Thien, Please attach the screenshot. Can you tell, which panel you are using? Best regards, Wizard TP700 and 900
DanielN Posts: 17 Rating: (2)
Suggestion To thank Quote Answer

9/17/2014 1:10 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 2/2/2023 Posts: 8586 Rating: (1122)	Hello, Well it is possible to use 50 recipes When you select Recipes, you see in the middle a screen "Recipes" and at the bottom you can insert the elements of the selected recipe or Datarecords of the selected recipe. At the top you see a line called <<add new>> (There you can add a new recipe ) Best regards, Wizard

Suggestion To thank Quote Answer

9/17/2014 1:52 PM	Rate (0)
Thien Nguyen Posts: 50 Rating: (7)	Hi Wizard. It's not what I want to have. - When I use "Add new" at this point I can add a new recipe to the same "recipe set" I allready have. For example, refering to the first pic. on my screenshot, I add a new row to the 4 rows, namely "Chanel Dependened"......, and "Seq06_R744_Charging": These 4 rows I called as my "recipe set". - With the "Recipe" in the good old WinnCC Flexibel I can make a new "recipe set" for example, please look at the second pic., on the screenshot you can see I have 4 sets of recipes. Each of them has its own set of recipes. For the recipe-set 01: 01_WSW: I have a settings for my proccess for windsheld washer; In 02_BRAKE: I have a settings for my proccess for break filling .... and at 04_AC: I have a settings for my proccess for Air Con filling. I hope the new TIA must have the same utility. Regards. Thien Attachment TP700_Add Recipe.jpg (262 Downloads)
Thien Nguyen Posts: 50 Rating: (7)
Suggestion To thank Quote Answer

9/17/2014 2:29 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 2/2/2023 Posts: 8586 Rating: (1122)	Hi Thien, Now I see, what you want. I'm afraid it is not possible in TIA Portal When you migrate the "good old" WinCC flexible project to a TIA Portal project, you will see, that "all" recipes are listed in one list. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Archives / Recipes

Follow us on