Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA push button question

Created by: JAM007 at: 3/26/2014 11:37 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/26/2014 11:37 PM	Rate (0)
JAM007 Posts: 3 Rating: (0)	We are using an HMI KTP600 PN with Totally Integrated Automation V12. We are having an issue with the push buttons under the libraries. Currently, when we press the button it stays latched on. We want to find a way to use the push button on the HMI so that the button is only active as long as the button is pressed. Thank you for your time.
JAM007 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/26/2014 11:51 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	What events are you configuring for the button? Pressed AND released events?
	science guy
Suggestion To thank Quote Answer

3/27/2014 12:00 AM	Rate (0)
JAM007 Posts: 3 Rating: (0)	We tried to set the event "Switch OFF" and "Deactivate" to reset the bit. This didn't change anything though.
JAM007 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/27/2014 1:25 AM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	JAM007 We tried to set the event "Switch OFF" and "Deactivate" to reset the bit. This didn't change anything though. Look at the event options for pressed and released. The other event types may not be useful for your needs.
	science guy
Suggestion To thank Quote Answer

5/27/2016 1:20 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by AlbretJuno is split to a separate thread with the subject Button does not perform "release" event. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on