Navigation

TIA V10.5 to TIA V11

Created by: Homeroid_BL at: 1/3/2012 1:34 PM (1 Replies)

1/3/2012 1:34 PM	Rate (0)
Homeroid_BL Posts: 211 Rating: (6)	Hi all! Does anyone here, from Siemens, know when will be possible to open projects (created in TIA V10.5) in TIA V11? Thanks! Please, try to open this one: https://rapidshare.com/files/2706590651/Terminal_SVE_V02.zip before you say that is possible.
Homeroid_BL Posts: 211 Rating: (6)	Last edited by: Homeroid_BL at: 1/3/2012 1:56 PM Last edited by: Homeroid_BL at: 1/3/2012 1:34 PM
Suggestion To thank Quote Answer

1/3/2012 2:35 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/14/2025 Posts: 15533 Rating: (2465)	I have had success opening my projects from 10.5 to v11. That said, not everything will copy over. Basically, you have to make a bunch of smaller projects with the pieces, port them over, then reassemble into a single project making sure to manually enter any pieces no longer compatible in V11. There is an update document that mentioned some of the problem areas. I believe PIDs are problematic and have to be recreated and reworked in V11. Your results are welcome.
	science guy
Suggestion To thank Quote Answer