Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA V11 installation

Created by: Rahma at: 5/20/2014 12:36 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

5/20/2014 12:36 PM	Rate (0)
Rahma Posts: 14 Rating: (0)	Dear All, I am encountering an error while installing the TIA Portal V11 (please refer to the errror image). I have installed STEP 7 Basic/Professional and WinCC Basic/Comfort/Advanced/Professional V11 SP2 already. Kindly help. Thank you in advance. Attachment Installation_Error.jpg (62 Downloads)
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/20/2014 12:55 PM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (167)	Check the error report as the message says. The screen itself does not give any clue what went wrong here.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/20/2014 1:15 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 2/2/2023 Posts: 1215 Rating: (115)	try this. check in Control Panel, and click uninstalled TIA V11, and look if the versions are equal. in my case is V12 good luck Attachment Sem título.jpg (49 Downloads)
	Obrigado.
Suggestion To thank Quote Answer

5/20/2014 1:43 PM	Rate (0)
Rahma Posts: 14 Rating: (0)	rdoliveira try this. check in Control Panel, and click uninstalled TIA V11, and look if the versions are equal. in my case is V12 good luck Hi my friend, The software is not installed in the first place so how can i check what you said. Many thanks
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/20/2014 2:29 PM	Rate (0)
Rahma Posts: 14 Rating: (0)	TomDeWou Check the error report as the message says. The screen itself does not give any clue what went wrong here. Hi, The error report is not giving any relevent information about what exactly the error is. Is there any way troubleshoot it? Thanks.
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/20/2014 2:29 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 2/2/2023 Posts: 1215 Rating: (115)	you have to have installed the V11, after you upgrade the SP3. Attachment desin.jpg (50 Downloads)
	Obrigado.
Suggestion To thank Quote Answer

5/20/2014 2:32 PM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (167)	Rahma Hi, The error report is not giving any relevent information about what exactly the error is. Is there any way troubleshoot it? Thanks. Add the SIA file here, I will check it.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/20/2014 2:36 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/27/2023 Posts: 13080 Rating: (2124)	Rahma Dear All, I am encountering an error while installing the TIA Portal V11 (please refer to the errror image). I have installed STEP 7 Basic/Professional and WinCC Basic/Comfort/Advanced/Professional V11 SP2 already. Kindly help. Thank you in advance. The last time I received an installation error like this, I had forgotten to right-click the setup file and run as administrator.
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on