Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA v11 licence question

Created by: JanJasek at: 11/10/2011 12:18 AM (5 Replies)

Rating (0)

Thanks 1

6 Entries

11/10/2011 12:18 AM	Rate (0)
JanJasek Advanced Member Joined: 9/28/2010 Last visit: 11/27/2024 Posts: 43 Rating: (8)	Hello, I have following licences and installations: Step 7 Basic v10.2 incl. SP2 licences: -Step 7 Basic 10.5 (licence from installation CD/DVD) -WinCC Basic 10.5 (licence from installation CD/DVD) Step 7 Professional Edition 2010 licence: - Step 7 Professional Edition 2010 5.5 (licence from USB stick) WinCC Flexible 2008 SP2 licence: - WinCC flexible 2008 Advanced 1.3 (licence from USB stick) Step 7 Professional V11 SP1 licence: - Step 7 Professional combo upgrade 11.0 (licence from USB stick) WinCC Advanced V11 SP1 licence: - WinCC Advanced upgrade 11.0 (licence from USB stick) But those upgrade licences for TIA v11 are not working. I had to activate trial licences to work with CPU300 and Multi Panels in TIA v11: Trial licences: -Step 7 Professional combo 11.0 -WinCC Advanced 11.0 (same name as I have, except without the upgrade in name). So, please - what licences am I missing, to get those upgrades working? Thanks.

Suggestion To thank Quote Answer

11/10/2011 10:30 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/13/2025 Posts: 4391 Rating: (1462)	Hi, Can you post some printscreens from your Automation License Manager (License Keys, missing License Keys, etc.)?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/10/2011 10:44 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/13/2025 Posts: 8804 Rating: (1173)	Hello JanJasek, You did not upgrade your license. Please select the license Step 7 Professional edition 2010 and go to License Key -> Upgrade Also select WinCC flexible 2008 and go to License Key -> Upgrade See this link: how do you install, uninstall and upgrade license keys? Best regards, Wizard

Suggestion To thank Quote Answer

11/10/2011 4:43 PM	Rate (0)
JanJasek Advanced Member Joined: 9/28/2010 Last visit: 11/27/2024 Posts: 43 Rating: (8)	Thank you Wizard very much! I didn't know I have to do the upgrade manually. After the upgrade I have the licence and it works. Nice day to everyone.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

12/8/2011 3:31 AM	Rate (0)
mferraz Posts: 3 Rating: (2)	I had the same problem... Maybe Siemens Should make this upgrade procedure a relevant part of the packaging of the USB pen drive containing the licenses. Thank you.
mferraz Posts: 3 Rating: (2)
Suggestion To thank Quote Answer

12/8/2011 8:23 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/13/2025 Posts: 10239 Rating: (1182)	mferraz ...Maybe Siemens Should make this upgrade procedure a relevant part of the packaging of the USB pen drive containing the licenses...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on