Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA V11 to V13

Created by: malkawi at: 6/22/2014 10:03 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/22/2014 10:03 AM	Rate (0)
malkawi Posts: 35 Rating: (0)	Hi. i started a project with Wincc V11 for TP900. now i installed the new V13 and when i opened the projects it asked me to convert it to V13, but now all the texts,buttons,pictures sizes in the HMI simulation have changed. any thoughts on that ?
malkawi Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

6/22/2014 1:24 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/17/2025 Posts: 4394 Rating: (1463)	Hi, What do you mean with "have changed"?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/22/2014 7:54 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	In WinCC V13 Settings, you can select in "Basic Settings..." (somewhere) to allowresizeingof graphics and fonts by changing a panel. Perhaps you try again with disable this setting...
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

6/23/2014 4:36 PM	Rate (0)
wax Advanced Member Joined: 6/1/2010 Last visit: 11/6/2024 Posts: 36 Rating: (4)	I also have this kind of problem. I dont find an other methode than manual... it's not a problem of resizing if you don't change the HMI model . Juste to be sure you don't change to win XP to win 7 when you install TIA V13 ?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on