Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA V13 copy paste

Created by: Out Control at: 8/1/2014 3:07 PM (8 Replies)

Rating (0)

Thanks 7

9 Entries

8/1/2014 3:07 PM	Rate (0)
Out Control Posts: 204 Rating: (1)	Dear, I face Big problem, I create tow programs in TIA V13 but i can't copy from one and paste to another .. are V13 didn't support copy and paste between two projects ?? IF no how can i do it Regards
Out Control Posts: 204 Rating: (1)	Last edited by: O_Moderator at: 8/12/2014 12:45 PM subject corrected
Suggestion To thank Quote Answer

8/1/2014 6:39 PM	Rate (0)
William_B Posts: 5225 Rating: (1198)	Out Control Dear, I face Big problem, I create tow programs in TIA V13 but i can't copy from one and paste to another .. are V13 didn't support copy and paste between two projects ?? IF no how can i do it Regards Hi there. I do not have any issue with copy and paste. I can do drag-and-drop within the same project between to PLCs and even copy into a second TIA sessions without any issues. We are on update 3 but I do not remember any issue even from the base version. Please show (me) us with a picture of what you want to do, as we might help you. As an alternative, you can drag and drop code/variable/++ into the Project Library (right side pane) under master copies. Then you can drag this back into the second PLC. w
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer

8/2/2014 11:02 PM	Rate (0)
Out Control Posts: 204 Rating: (1)	As an alternative, you can drag and drop code/variable/++ into the Project Library (right side pane) under master copies. Then you can drag this back into the second PLC. i can do that in two different projects or in same project ???
Out Control Posts: 204 Rating: (1)
Suggestion To thank Quote Answer

8/2/2014 11:22 PM	Rate (0)
William_B Posts: 5225 Rating: (1198)	Hi there. Copy via the library can be done in two ways. Method 1 is where you copy within the same project. Method 2 is where you copy between projects. Please see the JPEG to try and explain Method 1. For Method 2 you have to go through "Global Libraries". You have to create a new library and then after the process works the same as Method 1. Another method to follow.. w Attachment Visual clue_Copy via project library.jpg (520 Downloads)
William_B Posts: 5225 Rating: (1198)	Last edited by: William B. at: 8/2/2014 11:23 PM
Suggestion To thank Quote Answer

8/2/2014 11:27 PM	Rate (0)
William_B Posts: 5225 Rating: (1198)	okay.. for another method - you can create copies over project boundaries. At the core you open a reference project. Please see the JPEG. You will have problems making copies between S7-1200 / S7-1500 <-> S7-300 / S7-400. See if this helps you. w Attachment Visual clue_Copy via reference project.jpg (441 Downloads)
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Out Control aryzing M.Prasad

8/3/2014 7:03 PM	Rate (0)
Out Control Posts: 204 Rating: (1)	Dear william , i will try it and give you feedback Regards
Out Control Posts: 204 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

8/10/2014 12:53 PM	Rate (0)
aryzing Posts: 40 Rating: (2)	William B. okay.. for another method - you can create copies over project boundaries. At the core you open a reference project. Please see the JPEG. You will have problems making copies between S7-1200 / S7-1500 <-> S7-300 / S7-400. See if this helps you. w I too had this question and your solution worked like a charm. Thanks William!
aryzing Posts: 40 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Out Control William_B

12/24/2015 10:41 AM	Rate (0)
M.Prasad Posts: 1 Rating: (0)	William_B okay.. for another method - you can create copies over project boundaries. At the core you open a reference project. Please see the JPEG. You will have problems making copies between S7-1200 / S7-1500 <-> S7-300 / S7-400. See if this helps you. w Thank you sir, it worked well.
M.Prasad Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

12/24/2015 11:25 AM	Rate (0)
William_B Posts: 5225 Rating: (1198)	M.Prasad Thank you sir, it worked well. Thanks for the feedback! Now please go ahead and pay it forward... Say "thanks" by helping some other member who you can help.
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on