Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA V13, PG/PC setting, Realtek controller is missing

Created by: sandeep@ at: 5/11/2016 10:55 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

5/11/2016 10:55 AM	Rate (0)
sandeep@ Posts: 2 Rating: (0)	Realtek PCIe GBE Family controller is missing.what i do ??? ------------------------------------------------------------------------------------------ Split from TIA V13, Where can I find this PG/PC setting?. Attachment Untitled.png (1087 Downloads)
sandeep@ Posts: 2 Rating: (0)	Last edited by: Min_Moderator at: 5/11/2016 1:59:54 PM New subject after splitting
Suggestion To thank Quote Answer

5/11/2016 2:54 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 1/16/2025 Posts: 3123 Rating: (518)	Hello sandeep@, is the Realtek-adapter listed in the operating system where you run the TIA portal? Maybe the PCI adapter is not "plugged in" correctly. Best regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

5/12/2016 10:29 AM	Rate (0)
sandeep@ Posts: 2 Rating: (0)	PCI adapter is "plugged in" correctly.
sandeep@ Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/12/2016 10:38 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/24/2025 Posts: 22508 Rating: (3046)	Hello, is the card listed in "Online Accesses" in TIA Project three? is the card displayed in the "Set PG/PC" in the Windows control panel? Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ercetin

10/6/2016 4:48 AM	Rate (0)
Rafael2013 Posts: 13 Rating: (1)	Set your Gateway. I set mine to 192.168.1.1 and u will see it. -Yehey
Rafael2013 Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on