------------------------------------------------------------------------------------------
Split from PC adapter MPI for TIA Portal V12.

Are you sure you have the Adapter connected to the MPI port?

Left side port is MPI, right side port is DP.

ChristophD

 

Hati

Are you sure you have the Adapter connected to the MPI port?

Left side port is MPI, right side port is DP.

 Hi,

what exactly you mean?
The Adapter have only one Port for MPI and DP.

Same on the PLC site, only one Port for MPI and DP!

Regards

Christoph

 My bad, i had a quick look in the morning with foggy eyes. Firstly i was looking for the PLC to be 314C-2DP, but it's actually PN/DP, so only 1 DP port available.

erickbaleeiro

Good morning, I have the connection problem between the A2 USB adapter and the TIA V13 portal, the software does not recognize the CPU.

Are you sure that the port is configured as MPI? If it's configured as Profibus, the MPI connection doesn't work. You can only have the port as MPI or DP, not both at the same time.