TIA V13 SP1 upd3, alarm class priority

GB002

Hello

I'am using a S7 300 and i have connected it to TP2200. I have make alarm bits and it's working well.

I have got a small problem :

I would like to have some priority on my alarms. How to do that ?

For exemple :

if i have a temperature problem i would like to have this type of alarm firstly in the alarm table. Not like actually a to have it by date of problem.

Thanks

Hi

I use  TIA V13 SP1 update 3. I'm looking for the same thing.

How to defied alarm class priority ?

Regards,

----------------------------------------------------------------------------------------------------
Split from Alarm Priority with TIA 12 on hmi ?

You could create "Alarm classes" and assign them to different "Alarm view" controls.
(Add an "Alarm view" control to your screen, klick on "Properties > Properties > General" and disable all Alarm classes but the one(s) you want to see in this Alarm view.)
This way you can seperate them (for example by type of problem), but it's more than one alarm table.

As I understand, By defined different alarm class. it can display alarm as first alarm priority then alarm occurred time in the same alarm view.

please see in attached file.

Ex. Alarm no. 3613 defined as R-Stop class (ID 67)

      Alarm no. 3833, 3840 defined as Warning class (ID 69)

      Alarm no. 10017 defined as Notification class (ID 72)

I expected result that high priority alarm be on the top and follow by lower priority alarm.

but it not behave like that.

Do I miss something ? any suggestion? 

I need to do exactly the same thing.

I need to ensure that alarm class "Critical" alarms appear at the top of the Alarm View regardless of whether a low priority alarm class "Error" alarm is generated after it

Did anyone find a way to do this?