Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Time and Date display

Created by: Y.DHINAKARAN at: 6/3/2010 3:42 PM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

6/3/2010 3:42 PM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi, Is it possible to display the Date and time on the screen in the area of any soft key. Please help me. Dhinakaran.Y
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/3/2010 7:01 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 3/19/2023 Posts: 3276 Rating: (249)	Hi, Friend, what kind of system(840D/802D/????)? what kind of HMI(PCU50/PCU20/???) u give to less info.
	Please Help me to understand your question!
Suggestion To thank Quote Answer

6/3/2010 9:48 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 12/20/2022 Posts: 1502 Rating: (175)	Hi Or you have an old MMC103. Which Software do you want to Display ? VB, VC, EasyMask, BE1 ?
	Karl
Suggestion To thank Quote Answer

6/4/2010 5:55 AM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi, It is 840D with PCU50
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/6/2010 9:47 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	I did this: In PLC: I been used system function SFC1 „Read System Clock” to read actual time and date to the DB block then convert with BTI command to integer. In Wizard: Makes some soft key and form. Inside I read data blocks and displayed oneself on the screen. And that’s it. Makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

6/7/2010 9:06 AM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi friend, Please send the procedure to execute, it will helpful for me Thanks, Dhinakaran.Y
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/7/2010 11:00 AM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 3/19/2023 Posts: 583 Rating: (64)	Hi. It is my example with use HotWin. see attachment Simatic: FB60: CALL SFC 1 RET_VAL:=#error CDT :=#clock OB 1: CALL FB 60 , DB160 CALL FC 60 READY:=M100.0 //hours L MB 214 T MW 218 L MW 218 BTI T MW 220 //minutes L MB 215 T MW 218 L MW 218 BTI T MW 222 //sekonds L MB 216 T MW 218 L MW 218 BTI T MW 224 HotWin (OP12): [OEM_DATA]; ; number of visible data-fields in form MaxData = 10 ; data-field parameters Data1 = X:2, Y:2, LEN:20, FCOL:14, BCOL:9, FSIZE:11, FORMAT:##, ALIGN:RIGHT, DATA:/Plc/Memory/Word[110] Data2 = X:25, Y:2, LEN:20, FCOL:14, BCOL:9, FSIZE:11, FORMAT:##, ALIGN:RIGHT, DATA:/Plc/Memory/Word[111] Data3 = X:48, Y:2, LEN:20, FCOL:14, BCOL:9, FSIZE:11, FORMAT:##, ALIGN:RIGHT, DATA:/Plc/Memory/Word[112] Data4 = X:22, Y:4, LEN:4, FCOL:14, BCOL:9, HIGHCOL: 9, FSIZE:11, ALIGN:Middle, CASE0:TEXT1, CASE1:TEXT2, DATA:/Plc/Memory/BIT[201.5] Data5 = X:46, Y:4, LEN:4, FCOL:14, BCOL:9, HIGHCOL: 9, FSIZE:11, ALIGN:Middle, CASE0:TEXT1, CASE1:TEXT2, DATA:/Plc/Memory/BIT[201.5] Data6 = X:2, Y:20, LEN:20, FCOL:14, BCOL:9, FSIZE:11, FORMAT:##, ALIGN:RIGHT, DATA:/Plc/Memory/Word[106] Data7 = X:25, Y:20, LEN:20, FCOL:14, BCOL:9, FSIZE:11, FORMAT:##, ALIGN:RIGHT, DATA:/Plc/Memory/Word[105] Data8 = X:48, Y:20, LEN:20, FCOL:14, BCOL:9, FSIZE:11, FORMAT:##, ALIGN:RIGHT, DATA:/Plc/Memory/Word[104] Data9 = X:22, Y:22, LEN:4, FCOL:14, BCOL:9, HIGHCOL: 9, FSIZE:11, ALIGN:Middle, CASE0:TEXT1, CASE1:TEXT2, DATA:/Plc/Memory/BIT[200.0] Data10 = X:46, Y:22, LEN:4, FCOL:14, BCOL:9, HIGHCOL: 9, FSIZE:11, ALIGN:Middle, CASE0:TEXT1, CASE1:TEXT2, DATA:/Plc/Memory/BIT[200.0] Best regards. Attachment dc869187f30f.jpg (203 Downloads)
	Last edited by: O_Moderator at: 6/7/2010 11:04 AM picture transferred to attachment
Suggestion To thank Quote Answer

6/7/2010 11:55 AM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 3/19/2023 Posts: 583 Rating: (64)	Hi. Add: The first line - system time, The second line - an operating time under the program. Best regards.

Suggestion To thank Quote Answer

6/14/2010 3:23 PM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	hi makaveli, Plz send the procedure to display date and time by working in PLC. Regards, Y.Dhinakaran.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/14/2010 3:25 PM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi pfuser, Is their any trial version for HotWin Software. If,Plz send the link to download. Regards, Y.Dhinakaran.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on