Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Time Data type and its use

Created by: Erob at: 4/21/2011 9:01 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

4/21/2011 9:01 PM	Rate (0)
Erob Posts: 1 Rating: (0)	I have an TONR normal use nothing fancy. It's output at ET is in the Time data Type. However, I can't do anything with it. If I try to put it into a IO field of a touch panel it says it is not a valid data type. The only way to get it to work is use the type decimal then it will display like this: ET=10min0s345ms IOField would show = 600345 Shouldn't their be a way to display the Time out of the timer say 00:10:00:0345? any help will work.
Erob Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/24/2011 7:08 AM	Rate (0)
somjet Regular Member Joined: 4/15/2011 Last visit: 7/4/2024 Posts: 1 Rating: (0)	you change Display format : Auto for Et Et Show : h...m...s...ms Attachment 1.JPG (653 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users OmidBarghebani

|

Share this page:

Share this page on...

Follow us on