Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Time stamping on starter

Created by: AutoGen_360480 at: 11/11/2016 4:15 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

11/11/2016 4:15 PM	Rate (0)
AutoGen_360480 Posts: 27 Rating: (0)	Dear All, We are facing problem on starter when ever drive is tripping it shows some time we can not find out exact time. we do not have AOP30. we are using TDC so please provide some details for updating time on starter through TDC.
AutoGen_360480 Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

11/11/2016 4:30 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/10/2024 Posts: 22408 Rating: (3017)	Hello, the timestamps in starter based on the time information of the Connected drives. The drive can work in UTC mode or Working Hour mode. on the mode the tmestamps are based. You can try to sync the time in the drive with the time of the used plc. Which Drive type do you use? Which Filedbus do you use? Regards Christoph

Suggestion To thank Quote Answer

11/12/2016 8:08 AM	Rate (0)
AutoGen_360480 Posts: 27 Rating: (0)	ChristophD Hello, the timestamps in starter based on the time information of the Connected drives. The drive can work in UTC mode or Working Hour mode. on the mode the tmestamps are based. You can try to sync the time in the drive with the time of the used plc. Which Drive type do you use? Which Filedbus do you use? Regards Christoph we are using sinamics S120 drive with TDC controller. the communication between TDC and drive is conducted through profibus. we have more than 80 control unit so we can not provide AOP30. so please provide some details.
AutoGen_360480 Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

11/14/2016 6:34 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/10/2024 Posts: 22408 Rating: (3017)	Hello, check this App Example: https://support.industry.siemens.com/cs/ww/en/view/88231134 you must program the timesync between PLC and Drive yourself. Regards Christoph

Suggestion To thank Quote Answer

11/22/2016 11:41 AM	Rate (0)
AutoGen_360480 Posts: 27 Rating: (0)	Thanks for ur reply. Is this manual is suitable for TDC. ChristophD Hello, check this App Example: https://support.industry.siemens.com/cs/ww/en/view/88231134 you must program the timesync between PLC and Drive yourself. Regards Christoph
AutoGen_360480 Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

11/22/2016 11:54 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/10/2024 Posts: 22408 Rating: (3017)	Hi, i don't know it, never worked with the TDC. But in the documentation of it is schould be possible. Try it . Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on