Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

time synchronization on S7-1200 CPU

Created by: Damayanti at: 6/18/2013 5:46 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

6/18/2013 5:46 PM	Rate (0)
Damayanti Bronze Member Joined: 10/17/2011 Last visit: 7/19/2022 Posts: 148 Rating: (3)	Dear Pegaia Sir, I want to do time synchronization on S7-1200 CPU. Master clock is providing IRIG-B signal for time synchronization. In TIA V11, how to configure this signal for time synchronization? Is any additional hardware(converter) is required? please help. Warm regards, Damayanti
	Last edited by: O_Moderator at: 6/20/2013 10:23 AM new subject after splitting from /tf/WW/en/Posts/86723#top
Suggestion To thank Quote Answer

6/24/2013 12:16 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 12/8/2023 Posts: 4284 Rating: (1381)	Hi, if IRIG B could work with NTP protocool it would be just a question of Device View, CPU properties configuration. Witch withProtocoll works?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/25/2013 4:43 PM	Rate (0)
Damayanti Bronze Member Joined: 10/17/2011 Last visit: 7/19/2022 Posts: 148 Rating: (3)	Dear Sir, I don't know any thing about IRIG-B Signal. I have received mail from SICLOCK. Siemens regarding this signal conversion.I am attaching that mail, but I am not getting anything from that. please help. Warm regards, Damayanti Attachment IRIG-B.zip (263 Downloads)

Suggestion To thank Quote Answer

6/25/2013 6:48 PM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 9/7/2023 Posts: 474 Rating: (10)	Damayanti Dear Sir, I don't know any thing about IRIG-B Signal. I have received mail from SICLOCK. Siemens regarding this signal conversion.I am attaching that mail, but I am not getting anything from that. please help. Warm regards, Damayanti HI, I think i may possible if you purchase that recommended convertor to connect with 1200 PLC. This is some thing not related with industrial automation product. In 1200 PLC we have 1kHz reading inputs but the siganal from IRIG-B is having some Sine waves i think so , so our plc don't consider this analog waves. Can u tell your application????

Suggestion To thank Quote Answer

6/26/2013 8:10 AM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 9/7/2023 Posts: 474 Rating: (10)	Hi, FYR https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=6AG12141AG315XB0&caller=view check this link it have the specification of CPU 1214 DC/DC/DC . As per your requirement how much HSC input you requires? and compare this with CPU specification if it not suits you have to go for Specail function modules no other go

Suggestion To thank Quote Answer

7/3/2013 11:40 AM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 9/7/2023 Posts: 474 Rating: (10)	Hi, YOu got the solution for this issue?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on