Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Timer help

Created by: gt32ft4 at: 3/6/2023 12:35 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

3/6/2023 12:35 PM	Rate (0)
gt32ft4 Member Joined: 1/9/2022 Last visit: 10/14/2023 Posts: 26 Rating: (0)	good morning, can someone help me to develop a program that works with two strokes to trigger an output. ex: if an input is activated and remains there for 11 seconds or more, does it activate output one, and if that same input is deactivated before 9 seconds, does it activate the same output? the intention is to monitor the timing of this input, it should work within 10 seconds of each cycle. above ten after completing the cycle it alarms and below ten seconds it will also alarm.

Suggestion To thank Quote Answer

3/6/2023 12:46 PM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/3/2023 Posts: 31538 Rating: (3919)	Try this ...

Suggestion To thank Quote Answer

3/6/2023 1:18 PM	Rate (0)
gt32ft4 Member Joined: 1/9/2022 Last visit: 10/14/2023 Posts: 26 Rating: (0)	thank you very much .

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on