Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

timer

Created by: ramzi140 at: 1/26/2013 9:53 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/26/2013 9:53 AM	Rate (0)
ramzi140 Posts: 11 Rating: (0)	dear all i have a qusation and i need help. i want to set a timer it start when the input is 1 and if the input goes to 0 and after some time return to 1 i want the timer to continue the count where he stop not start from the begining. thanks
ramzi140 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

1/26/2013 11:06 AM	Rate (0)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 7/17/2023 Posts: 1410 Rating: (154)	Look at this thread: /tf/WW/en/Posts/84600#top Look for my answer, as I think is the simplest way, you will find it also in themanual. Take a look for TONR also.
	Last edited by: Marko Bursic at: 1/26/2013 11:09 AM
Suggestion To thank Quote Answer

1/26/2013 2:06 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/24/2025 Posts: 1523 Rating: (230)	ramzi140 dear all i have a qusation and i need help. i want to set a timer it start when the input is 1 and if the input goes to 0 and after some time return to 1 i want the timer to continue the count where he stop not start from the begining. thanks Hello ramzi140, Yeah TONR can solve this. This TONR is only for S7-1200.
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on