Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIP: How to change the S7-1500 Display's Language

Created by: Denilson Pegaia at: 4/10/2014 12:05 PM (8 Replies)

Rating (0)

Thanks 1

9 Entries

4/10/2014 12:05 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	Hi, One of the nice features of S7-1500 is a Multilanguage Display. It brings to the user to read diagnoses and make some configurations directly on the device. Once it is Multilanguage, it is possible that the S7-1500 Display was configured in an unknown language (e.g. when S7-1500 is embedded in an imported machine). The follow steps (keys commands) can be used to change the language of the Display device.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VVago

4/10/2014 12:08 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 1: Uses up arrow key to bring the "focus" to the first (open) line. Attachment C:\Users\z0008iwv\Pictures\STEP1.jpg (380 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/10/2014 12:10 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 2: Usesright arrow key to bring the "focus" to thelast (right) icon Attachment C:\Users\z0008iwv\Pictures\step2.jpg (333 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/10/2014 12:12 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 3: Press OK key Attachment C:\Users\z0008iwv\Pictures\step3.jpg (311 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/10/2014 12:14 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 4: Press Down Arrow Key two times (i.e. go down the focus two lines) Attachment C:\Users\z0008iwv\Pictures\step4.jpg (332 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/10/2014 12:15 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 5: Press OK key Attachment C:\Users\z0008iwv\Pictures\step5.jpg (269 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/10/2014 12:22 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 6: Uses Left / Right Arrows Keys to change the language. TIP: At FW 1.5, there are the follow languages avaliable: German English French Spanish Italian Japanese Chinese (simplified) Korean Russian Turkish Portuguese (Brazil) Attachment C:\Users\z0008iwv\Pictures\step6.jpg (266 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/10/2014 12:24 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	STEP 7: Press OK Key to confirm Attachment C:\Users\z0008iwv\Pictures\step7.jpg (244 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/23/2017 12:01 PM	Rate (0)
dzejkob Advanced Member Joined: 3/13/2016 Last visit: 8/10/2022 Posts: 17 Rating: (0)	Hi, Simple question, is it possible to add languages (f.e. Polish) to s7 1500 CPU? Regards, Jakub Gawroński
	Last edited by: dżejkob at: 11/23/2017 12:01:32 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on