Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIP: Strucs for ET 200SP AI Energy Meter

Created by: Denilson Pegaia at: 10/3/2014 11:22 AM (0 Replies)

Rating (0)

Thanks 2

1 Entries

10/3/2014 11:22 AM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 5/26/2023 Posts: 4184 Rating: (1342)	Hi, To access the ET 200SP AI Energy Meters data, it is necessary either use DataRecord Acyclic read or IO manipulation. Both solutions need DataType to work. STEP 7 V13 hasn't this DataType as default. So, I meant to offer a library of this DataType (attached). Unhappily it is not revised, so I ask you to be careful and to give me feedback about it. Information references: Manual http://support.automation.siemens.com/WW/view/en/73098696 Application & Tools http://support.automation.siemens.com/BR/view/en/89042981 Attachment AI Energy Meter Data Types.zip (126 Downloads)
	Last edited by: Min_Moderator at: 10/6/2014 1:49 PM Reattach attachment Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Navnag Min_Moderator

|

Share this page:

Share this page on...

Follow us on