Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIP: Using tagprefix and Dynamic Dialog for better performance.

Created by: Jaapie at: 8/12/2008 3:35 PM (6 Replies)

Rating (2)

Thanks 0

7 Entries

8/12/2008 3:35 PM	Rate (2)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 11/22/2024 Posts: 800 Rating: (63)	Hi All, Just a little tip for you all: If you use a tagprefix on a picturewindow all scripts and objects (within this picturewindow) witch use tags will automatically use this prefix. Almost everybody will know this I think.But did you know that even within the Dynamic Dialog” this prefix will work! If you want to configure these objects within Dynamic Dialog you first have to create dummy tags, but this effort will be rewarded with a great performance of your faceplates when using e.g. bit selections. Be careful to use only one tag within one Dynamic Dialog (for performance reasons). Good luck,Jaap
	Last edited by: Jaapie at: 8/12/2008 3:42 PM Last edited by: Jaapie at: 8/12/2008 3:39 PM Last edited by: Jaapie at: 8/12/2008 3:37 PM
Suggestion To thank Quote Answer

8/25/2008 5:25 PM	Rate (0)
S.S.D.D. Posts: 67 Rating: (0)	How well does this work from project to project? Do you have create each of these tags in each project?
S.S.D.D. Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

8/25/2008 8:08 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 11/22/2024 Posts: 800 Rating: (63)	Hi TopCat, Once you have created and configured your pictures/faceplates you can use them in every project you want. The dummy internal tags do not have to be created in other projects only if you want to edit the Dynamic dialog. Have fun. Jaap

Suggestion To thank Quote Answer

8/26/2008 9:48 AM	Rate (0)
perdahlqvist Gold Member Joined: 10/26/2005 Last visit: 1/9/2025 Posts: 284 Rating: (50)	Hi! It also works in all scripts(vbs,c)...(and its wery well documented) /7Per

Suggestion To thank Quote Answer

8/26/2008 2:15 PM	Rate (0)
S.S.D.D. Posts: 67 Rating: (0)	That was part of my original inquiry.....where is this all documented? I have seen basic reference to a few linking examples in the WinCC manual and faceplate designer manual but they left out alot of details I have been picking up through conversations.
S.S.D.D. Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

8/27/2008 8:20 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 11/22/2024 Posts: 800 Rating: (63)	Hi TopCat, Your right. Learning on the job. No documentation on this point. Jaap

Suggestion To thank Quote Answer

8/27/2008 8:43 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	TopCat4692 That was part of my original inquiry.....where is this all documented? I have seen basic reference to a few linking examples in the WinCC manual and faceplate designer manual but they left out alot of details I have been picking up through conversations. Search'Tag Prefix' in WinCC information system
JMJ Posts: 487 Rating: (45)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on