hey,

i'm trying the mail FB for the S7 1500 and its not working but i don't know why.

i used the Tmail_v4 and i have a CP1543-1 so there schould be no problem there

also i get no error status but if i put a counter at the error output i see i gave 1 also busy was high 1cycle and done never whent high.

i didn't get the mail, its just a simple text to try this fuction i'l add an image of what i have.

plz someone clear this out :p

PS: sorry for the bad english

the problem is resolved there were " in the to_s and that made a wrong adres also

don't look at te error_status of the blok itself but look inside the DB of the block itzelf and find

"TMAIL_C_DB".temp_status and "TMAIL_C_DB".temp_stf_status cause here you wil fing realy usefull error statuses to solve the problem is you have one also a Hardwere ID needit to be added.

if you have a problem with this just leave a question here

thx for all the help to myself :p

Dear ,

One more suggestion, If you want to propose Mailing facility via S7 PLC. I will say S7 1500 as Master control and use the lower S7 1200 PLC for mailing. It works fine without any extra hardware. you need only local made router and internet line.

Regards,

Dj