Navigation

to adapt the encoder pulse after the TM41 from 2048 of the motor to 2500 as the CNC require what's is possible to use?

Created by: WernerBO at: 2/9/2014 8:12 PM (1 Replies)

2/9/2014 8:12 PM	Rate (0)
WernerBO Regular Member Joined: 2/3/2011 Last visit: 9/13/2024 Posts: 15 Rating: (0)	Hello, to adapt the encoder pulse ater the TM41 fro 2048 of the motor to 2500 as the CNC require what's is possible to use?
	Last edited by: GrasserF at: 2/10/2014 8:02 AM new subject after splitting from /tf/WW/en/Posts/73638
Suggestion To thank Quote Answer

2/14/2014 9:52 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (67)	... you will find the possible settings in function manual and list manual. What is your motor encoder - sin/cos?

Suggestion To thank Quote Answer